We produce built Transformer Cores as a built up unit up to 50 MT

Specific Item Grabs

MR FIXED MULTI RAIL GRAB.


  • The MR Multi-rail grabs have been designed to facilitate the fast bulk handling of a specific rail section (details to be advised at time of order).
  • Rails are locked onto the clamp by swivelling feet that locate under the rail-head and top clamp body that rotates in a cam action pressing a hard rubber lined horizontal beam onto the top of the rail-head.
  • The rubber lined contact beam prevents marking or damage to the rail-head. Two clamps are recommended at centres of 50 to 60% of rail length for rails up to 20 mtr long. For rails longer than 20 mtr, three clamps at centre distance between outer clamps of 65 to 75% of rail length must be used. (NB. Clamp must be within rated WLL).
  • Rails to be lifted must be stacked with bottom flange toes touching. All rails must be of the same rail section size.


MRC INTERCHANGEABLE MULTI RAIL GRABS.                                   

  • The MRC Multi-rail grabs have been designed to facilitate the fast bulk handling of ALL rail sections.The features and applications of the MRC Multi-rail grabs are similar to that of the MR Multi-rail clamps but with the added benefit of having interchangeable, modular designed comb sections. Various combs sections to suit specific rails can be combined with the same scissor mechanism. Alternative comb sections are to be purchased separately. Please contact our sales team for further details.
  • An additional feature of the MRC is that it can be fitted with an automatic open / close device that automatically engages the rail sections when the clamp is lifted from the rest position on top of the rails.
  • The construction incorporates 4 hooks with safety latches that allow fast loading and unloading of the bags.


BTG CONCRETE PIPE LIFTING CLAMPS.                                   

  • Working load limit (WLL) 1500 - 3000kgs*
  • The BTG concrete pipe lifting clamps are sold in sets of three and they come complete with chain slings (the working load limits shown are based on a set of three clamps).
  • They are designed for the vertical transportation of concrete pipe sections with a diameter of up to 2000mm.
  • The jaw capacity is designed for pipe thickness of 40 - 200mm.
  • Attachment and removal of the clamps from the pipes is extremely easy due to the simple and straightforward design.

TBG BLOCK GRABS.                                   

  • Working load limit (WLL) 200 - 1000kgs
  • The TBG block grabs are designed to transport all materials with parallel surfaces that can withstand a clamping pressure twice as high as the load being lifted. The range offers jaw capacities from 0 - 1100mm. They are extremely easy and simple to use and make for safe lifting.
Options:
  • Available with automatic open / close device.
  • Jaws can be fitted with serrated teeth or rubber lined pads. Please specify at time of ordering.
  • NB: When using the models fitted with rubber pads, it is important that the surfaces are dry, clean and free of oil and grease.

TRU ROUND STOCK GRABS.                                   

  • Working load limit (WLL) 100 - 4000kgs
  • The TRU round stock grabs are designed to pick up tubes, pipes and rolls or similar round stock material with a diameter of up to 600mm. They are extremely easy and simple to use and make for safe lifting.
Options:
  • Available with automatic open / close device.
  • Jaws can be fitted with plastic or rubber pads to minimise marking of surfaces.
  • NB: When using the protective lining, it is important that the surfaces are dry, clean and free of oil and grease.

CLT/CLB CLT FOR TOP LIFTING CLB FOR SIDE LIFTING.                                   

  • Working load limit (WLL) 32000 - 56000kgs
  • These container lifting lugs are supplied in sets of 4 and are available in with a total lifting capacity of up to 56 tonnes. The CLT and CLB lugs serve as flexible lashing points for the transportation of containers.
  • Two types are available dependant on if you want to fasten them to the top or the side of the container:
  • The CLT type is vertically mounted in the hole at the top of the container and is locked into place by simply turning the lug 900. This configuration allows for transportation via the use of a lifting frame in conjunction with cables, chains or slings.
  • The CLB model is mounted horizontally to the side of the container at either the top or the bottom fixing holes. This model has a spring loaded bolt to prevent accidental release.
NB. NOT TO BE USED ON A 4 LEG CHAIN SLING


Contact Us

Follow us on Facebook

Copyright © 2013 KRYFS Manufacturers. All Rights Reserved.

SEND INQUIRY