enites

Always Putting Values Above Business

    You are here:  
  1. Home
  2. About
  3. Milestones

Milestones

June 2018

GEORG TBA 400 cut to length line machine installed at KRYFS Power Components Ltd. factory, which was inaugurated by Mr. P. Shivdasani, Vice President, Bharat Bijlee Ltd., in the presence of Mr. P. S. Subramanian, Sr. General Manager, Bharat Bijlee Ltd.

March 2018

KRYFS won 'Best Stall' Award during ELECRAMA 2018, in the category of 'Bare space of 200sqm and above'

March 2017

Successful execution of Impulse test and Temperature Rise test on our 5 MVA , 33 KV/ 4x380 V, 5 Windings Inverted Duty Transformer for ACME Cleantech Solutions’ 360 MW Solar Power Project, Telangana.

February 2017

KRYFS’ 8th factory, a manufacturing facility to process transformer cores initiated operations at Vadodara

September 2016

11th cut to length line machine installed at Kryfs Power Components Ltd. factory, which was inaugurated by Mr. Anindya Basu, Vice President - Transformers, CG

June 2016

Bureau of Indian Standards (BIS) grants the license for Outdoor type three - phase distribution transformers up to and including 100 kVA 11 kV to 24 X 7 KRYFS TRANSFORMERS PVT. LTD. under IS 1180

May 2016

3.15 OPTCL Odissa Type Test conducted in CPRI

May 2016

5 MVA NBPDCL - Bihar Type Test successfully conducted in CPRI

March 2016

KRYFS got NTPC approval for 2.5 MVA Inverter Duty Transformer for Solar Application for Ananthpur Project

January 2014

KRYFS is recognised as Star Performer at prestigious EEPC INDIA National Awards for Engineering Export Excellence 2012-13

December 2013

KRYFS recognised as Innovation Winner at, ASSOCHAM - ICAI SMEs Excellence Awards - 2013

October 2013

Toyota Tsusho Corporation, a subsidiary of Japanese automobile giant Toyota Motors, increases the strategic stake to 20% in KRYFS

March 2013

KRYFS gets accredited as ISO 14001:2004 & OHSAS 18001:2007 certified company.

December 2012

Total manufacturing capability reaches 50,000 MTPA with addition of further 2 automatic cut to length lines

July 2012

Toyota Tsusho Corporation-Japan subsidiary of Automobile Toyota takes a stake of 10% in KRYFS

June 2012

LARA (Turkey) machine installed in the factory for manufacturing of Torroidal ( wound cores).

May 2012

Acquired PTPL- Pratik Transformers Pvt Ltd - Vadodara a manufacturer of transformers

April 2012

KRYFS buys back 15% Reliance India Power Fund (RIPF) Share holding.

October 2011

Received “Certificate of Appreciation” from Crompton Greaves For supplying Lamination in development of 1200 KV Transformer for National Test Station PGCIL - Bina

November 2010

Installed AEM - Australia machine for manufacturing of Unicores ( wound cores).

September 2010

Total manufacturing capability reaches to 30000 MTPA with addition of further 2 automatic cut to length lines

December 2009

Received the Prestigious EEPC National Award for Star performer for Exports from Hon’ble Shri Anand Sharma, Union Minister for Commerce

November 2008

India’s first Step Lap design, manufacture and assembly facility to reduce transformer No Load losses by 5 to 8%

July 2008

Only one of the two PGCIL approved facilities for producing 400 KV class transformer laminations

April 2008

Received Prestigious order from BHEL for India’s largest 498 MVA transformer laminations for HVDC line at Ballia - Bhiwadi, Rajasthan

Dec 2007

Acquired ETE (Thana Electric) at Silvassa to manufacture transformers up to 10 MVA/33 KV class

Dec 2007

Short listed as top performing companies in the Engineering sector for CNBC - ICICI Emerging India awards out of 128,000 companies

Jun 2007

KRYFS honored with the All India EEPC Star Performer Award for top export performance during 2005-06

Jan 2007

KRYFS received EEPC Star Performer Silver Shield Award for its outstanding export performance in 2004 - 05

Dec 2006

Reliance India Power Fund (RIPF) buys 15% stake in KRYFS Power Components Ltd.

Nov 2006

KRYFS gets Power Grid approval

Oct 2005

KRYFS gets Star Export House status

2001

Commissioned first Georg automatic cut to length line capable of cutting laminations up to 1000 mm. Total Capacity 9000 MTPA

2001

KRYFS India’s first ISO 9001 lamination manufacturer

April 1998

KRYFS enters into Technical Collaboration with Slingmax, USA

1997

Production commenced at Kherdi plant, Total capacity of Palghar and Kherdi Unit 2000 MTPA

1992

Commenced Commercial production at Palghar with capacity of 300 MTPA

June 2018

GEORG TBA 400 cut to length line machine installed at KRYFS Power Components Ltd. factory, which was inaugurated by Mr. P. Shivdasani, Vice President, Bharat Bijlee Ltd., in the presence of Mr. P. S. Subramanian, Sr. General Manager, Bharat Bijlee Ltd.

March 2018

KRYFS won 'Best Stall' Award during ELECRAMA 2018, in the category of 'Bare space of 200sqm and above'

March 2017

Successful execution of Impulse test and Temperature Rise test on our 5 MVA , 33 KV/ 4x380 V, 5 Windings Inverted Duty Transformer for ACME Cleantech Solutions’ 360 MW Solar Power Project, Telangana.

February 2017

KRYFS’ 8th factory, a manufacturing facility to process transformer cores initiated operations at Vadodara

September 2016

11th cut to length line machine installed at Kryfs Power Components Ltd. factory, which was inaugurated by Mr. Anindya Basu, Vice President - Transformers, CG

June 2016

Bureau of Indian Standards (BIS) grants the license for Outdoor type three - phase distribution transformers up to and including 100 kVA 11 kV to 24 X 7 KRYFS TRANSFORMERS PVT. LTD. under IS 1180

May 2016

3.15 OPTCL Odissa Type Test conducted in CPRI

May 2016

5 MVA NBPDCL - Bihar Type Test successfully conducted in CPRI

March 2016

KRYFS got NTPC approval for 2.5 MVA Inverter Duty Transformer for Solar Application for Ananthpur Project

January 2014

KRYFS is recognised as Star Performer at prestigious EEPC INDIA National Awards for Engineering Export Excellence 2012-13

December 2013

KRYFS recognised as Innovation Winner at, ASSOCHAM - ICAI SMEs Excellence Awards - 2013

October 2013

Toyota Tsusho Corporation, a subsidiary of Japanese automobile giant Toyota Motors, increases the strategic stake to 20% in KRYFS

March 2013

KRYFS gets accredited as ISO 14001:2004 & OHSAS 18001:2007 certified company.

December 2012

Total manufacturing capability reaches 50,000 MTPA with addition of further 2 automatic cut to length lines

July 2012

Toyota Tsusho Corporation-Japan subsidiary of Automobile Toyota takes a stake of 10% in KRYFS

June 2012

LARA (Turkey) machine installed in the factory for manufacturing of Torroidal ( wound cores).

May 2012

Acquired PTPL- Pratik Transformers Pvt Ltd - Vadodara a manufacturer of transformers

April 2012

KRYFS buys back 15% Reliance India Power Fund (RIPF) Share holding.

October 2011

Received “Certificate of Appreciation” from Crompton Greaves For supplying Lamination in development of 1200 KV Transformer for National Test Station PGCIL - Bina

November 2010

Installed AEM - Australia machine for manufacturing of Unicores ( wound cores).

September 2010

Total manufacturing capability reaches to 30000 MTPA with addition of further 2 automatic cut to length lines

December 2009

Received the Prestigious EEPC National Award for Star performer for Exports from Hon’ble Shri Anand Sharma, Union Minister for Commerce

November 2008

India’s first Step Lap design, manufacture and assembly facility to reduce transformer No Load losses by 5 to 8%

July 2008

Only one of the two PGCIL approved facilities for producing 400 KV class transformer laminations

April 2008

Received Prestigious order from BHEL for India’s largest 498 MVA transformer laminations for HVDC line at Ballia - Bhiwadi, Rajasthan

Dec 2007

Acquired ETE (Thana Electric) at Silvassa to manufacture transformers up to 10 MVA/33 KV class

Dec 2007

Short listed as top performing companies in the Engineering sector for CNBC - ICICI Emerging India awards out of 128,000 companies

Jun 2007

KRYFS honored with the All India EEPC Star Performer Award for top export performance during 2005-06

Jan 2007

KRYFS received EEPC Star Performer Silver Shield Award for its outstanding export performance in 2004 - 05

Dec 2006

Reliance India Power Fund (RIPF) buys 15% stake in KRYFS Power Components Ltd.

Nov 2006

KRYFS gets Power Grid approval

Oct 2005

KRYFS gets Star Export House status

2001

Commissioned first Georg automatic cut to length line capable of cutting laminations up to 1000 mm. Total Capacity 9000 MTPA

2001

KRYFS India’s first ISO 9001 lamination manufacturer

April 1998

KRYFS enters into Technical Collaboration with Slingmax, USA

1997

Production commenced at Kherdi plant, Total capacity of Palghar and Kherdi Unit 2000 MTPA

1992

Commenced Commercial production at Palghar with capacity of 300 MTPA

Search

Slideout

SOLAR ENERGY METER

8882.3 kWh

Solar Energy Generated Today

6328MWh

Solar Energy Generated Lifetime